NEC Univerge SV8100 - Page 419

Issue 7.00
InMail System Guide 3 - 411
Default
0 (No - disabled)
 47-06-09 Auto Time Stamp
Use this option to enable or disable Auto Time Stamp for the Subscriber
Mailbox. If enabled, after the subscriber listens to a message InMail
announces the time and date the message was left. Auto Time Stamp will
also announce the message sender (if known).
A subscriber can also enable Auto Time Stamp from his mailbox.
. See Auto Time Stamp for more.
. See Routing Mailbox for more.
. See Voice Mail Overflow for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
 47-06-10 System Administrator (System Admin)
Use this option to designate the Subscriber Mailbox as a System
Administrator. This allows the subscriber to use the SA options after logging
onto their mailbox.
. See Routing Mailbox for more.
. See System Administrator for more.
. See Voice Mail Overflow for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)
 47-06-11 Dialing Option
Dialing Option provides additional dialing options for Next Call Routing
Mailbox calls (see Next Call Routing Mailbox below). If enabled, a caller
who accesses the Subscriber Mailbox to leave a message can dial any of
the options in the Next Call Routing Mailbox’s Dial Action Table. If disabled,
the caller can only dial 0 (to use the Next Call Routing Mailbox’s 0 action).
. See Routing Mailbox for more.
. See Next Call Routing Mailbox.
. See Voice Mail Overflow for more.
Options
1 (Yes - enabled)
0 (No - disabled)
Default
0 (No - disabled)