Issue 7.00
3 - 422 Programming
47-08 Routing Mailbox Call Routing Options
Description
Use 47-08 Routing Mailbox Call Routing Options to set the options for mailboxes
assigned as Call Routing Mailboxes in 47-07-02 Routing Mailbox Type.
.
See Routing Mailbox for more.
Description
47-08-01 Dial Action Table
Use this option to assign the Dial Action Table to the Call Routing Mailbox.
The Dial Action Table defines the dialing options for the call Routing
Mailbox.
. See Routing Mailbox and Dial Action Table for more.
Options
1~16 (Dial Action Table 1~16 (1~32 from v8.00 software))
Default
1 (Dial Action Table 1)
47-08-02 Screened Transfer Timeout (Scrn Trf Timeout)
Use this option to set how long a Screened Transfer (TRF) from the
Automated Attendant rings an unanswered extension before recalling.
. This option has a similar function as Customize: Mailbox Options: Call Routing:
[Call Handling] Options: Delay Rings Before Redirect Transfer in InMail.
Options
0~255 seconds
Entering 0 causes immediate recall.
Default
15 seconds
47-08-03 Time Limit for Dialing Commands (Dialing Timeout)
This option determines how long InMail waits for an Automated Attendant
caller to dial before routing the call to the Timeout destination.
. Be sure your Dial Action Tables have a Timeout action programmed.
. See Routing Mailbox on page 2-321 and Dial Action Table on page 2-107 for more.
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout action programmed,
the caller routes to that destination.
When the associated Dial Action Table does not have a Timeout action
To Next Page
Loading...
