NEC Univerge SV8100 - Page 442

Issue 7.00
3 - 434 Programming
Default
Answer Table 1 = 3 (Routing Mailbox)
Answer Table 2~8 (2~16 from v8.00 software) = 0 (Undefined)
. If any of the Input Data values are entered, the terminal displays the Override Mailbox
Number selection (below).
 47-11-03 Default Mailbox Number (Default MB Num)
Use this option to set the Answer Table’s Default Mailbox number. InMail
uses the Default Mailbox when an Answer Schedule is not in effect. By
default, this occurs at all times other than Monday through Friday from 8:30
AM to 5:00 PM.
. See Answer Tables on page 2-47.
Options
Digits (3 maximum, using 0~9).
Do not enter leading zeros. (For example, for Routing Mailbox 1 enter 1, not
01 or 001).
Default
Answer Table 1 = 1
Answer Table 2~8 (2~16 from v8.00 software) = No entry
 47-11-04 Next Answer Table
When 10 Answer Schedules within an Answer Table are not sufficient, use
this option to link two Answer Tables together. InMail treats the two linked
tables as a single 20-entry Answer Table.
. See Answer Tables on page 2-47 for more.
Options
Answer Table (1~8 (1~16 from v8.00 software))
0 (Undefined)
Default
0 (Undefined)