NEC Univerge SV8100 - Page 479

Issue 7.00
InMail System Guide 3 - 471
47-20: Station Mailbox Message Notification
Options
Description
Use this option to set up the Message Notification options for a station
mailbox. To use Message Notification, program 47-02-23 must be set to
1
(All message notification enabled). From v8.00 software or higher PRG47-
02-28 allows for a queuing option for station message notification.
Options
There are five seperately programmed Message Notification entries for each
Subscriber Mailbox
 47-20-01: Notification
Use this option to enable or disable the specific message notification entry.
Options
Enable or disable.
Default
Disable.
 47-20-02: Notification Begin Hour
Use this option to specify the hour setting for the notification to begin.
Options
Digits using 0-23 Hour, (24 hour mode).
Default
0 (Midnight)
 47-20-03: Notification End Hour
Use this option to specify the hour setting for the notification to end.
Options
Digits using 0-23 Hour, (24 hour mode).
Default
0 (Midnight)
• Cascading Message Notification requires software version 04.00 or higher and a compact flash of
InMail 2.10 or higher.