NEC UNIVERGE SV8500 - Connecting Pcpro to the Telephony Server; Serial; Direct Connection; Connection Method; Hardware Requirements

– 19 –
CHAPTER 3 Setting Up PCPro
3. Connecting PCPro to the Telephony Server
Three ways are available for connecting the Telephony Server to the PC (PCPro is installed). Choose one of
these methods to suit your particular needs.
• Serial / Direct Connection
• Serial / Dial-up Connection
• TCP/IP Connection
3.1 Serial / Direct Connection
3.1.1 Connection method
STEP 1: Connect PCPro directly to IOC by using RS-232C serial port.
3.1.2 Hardware requirements
*Customer purchases
Product Name Remarks
PC*
• For the specifications of the PC required, see “Operating En-
vironments and Conditions”.
RS-232C CA-0/1 Cable
SV 4PORT CA-A Cable
• Used to connect between IOC and PC.
PCPro
RS-232C CA0/1
SV 4PORT CA-A
IOC