NEC UNIVERGE SV8500 - Hardware Requirements; TCP;IP Connection; Connection Method

– 21 –
CHAPTER 3 Setting Up PCPro
3.2.2 Hardware requirements
Note 1:
Use the same modem on IOC side and PCPro side.
3.3 TCP/IP Connection
3.3.1 Connection method
STEP 1: Connect in any of the following methods.
In the case of Local Connection:
Connect between PCPro and HUB by using LAN cable.
Product Name Remarks
Required on the IOC side
Modem Note 1
AT Modem in the marketplace, compliant to
the following specification.
• Modem supporting AT commands
• Synchronous/Asynchronous communica-
tion
• Supporting MNP
• Duplex
2400 RS-232C CA-3 Cable
SV 4PORT CA-A Cable
COT Circuit Card
LC Circuit Card
IOC Circuit Card
Required on the PCPro side
PC
• For the specifications of the PC required,
see “Operating Environments and
Conditions”.
Modem Note 1
AT Modem in the marketplace, compliant to
the following specification.
• Modem supporting AT commands
• Synchronous/Asynchronous communica-
tion
• Supporting MNP
• Duplex
RS-232C Cable