– 20 –
CHAPTER 3 Setting Up PCPro
3.2 Serial / Dial-up Connection
3.2.1 Connection method
STEP 1: Connect PCPro to IOC via modem by using RS-232C serial port.
Note: Before setting the [Connection Account Setting], set the following setting.
- Modem Setting on IOC side
- Modem Setting on PCPro side
STEP 2: Connect the modem as shown below.
Public
Network
Modem
Modem
PCPro
SV 4PORT CA-
2400 RS-232C CA-3
COT
LC
IOC