PL- 3
PRODUCT LIABILITY
DANGER
Do not attempt to repair or move the main power source without assistance from the dealer.
Do not put any metal or combustible objects into a vent of the PBX, the main power source, or any
peripheral equipment. Operating the system in this state might cause a fire, an electrical shock, or
a system failure. If this occurs, turn off the power and contact the dealer.
Be careful when using any peripheral equipment’s Liquid Crystal Display (LCD). If the liquid
leaks, it can be harmful to the user and to the system.
Before connecting any non-NEC, customer-provided equipment, check with the supplier to ensure
that the equipment is compatible. If the supplier cannot confirm the compatibility, do not connect
the equipment. Connecting incompatible equipment might cause a fire or an electrical shock.
To Next Page
Loading...
