– 34 –
CHAPTER 3 Setting Up PCPro
The commands being executed will exit automatically. Also, If alarms and traffic data are being collected, it will
stop. However, in the following cases, they will not exit automatically.
[Command without a Menu Bar]
• While the communication link with the system is being established.
• While displaying a dialog such as error messages.
[Command with a Menu Bar]
• They will not exit automatically.
Note: If these process cannot be executed normally, the communication link will not be cleared and PCPro will
not exit.
PCPro has now exited.
[Exit] icon
[Close] button
To Next Page
Loading...
