System Configuration and Setup 2-11
Main Menu Items
Menu Item Settings (default is bold)
CPU Speed Displays the processor speed.
This field is read-only and cannot be changed from BIOS
Setup.
Example: 600 MHz
BIOS Revision Displays the BIOS revision number.
This field is read-only and cannot be changed from the
BIOS Setup.
Example: 1.0F-3707-6211/149A-0100
QuickBoot Mode
Enabled, Disabled
Internal HDD Submenu Items
Menu Item Settings (default is bold)
Type
Auto, None, User
When set to Auto, the values for Cylinders, Heads,
Sectors, and Maximum Capacity as read only.
When set to Auto, the BIOS detects what the drive is
capable of, not the translation mechanism that was used to
format the drive. If a drive is run in a mode other than the
mode in which it was partitioned and formatted,
unpredictable results may occur, including data loss.
When set to None, informs the system to ignore this drive.
When set to User, allows the manual entry of all fields
described next.
Cylinders When Type is Auto, value in the Cylinders field is auto-
detected and field is read only.
Heads When Type is Auto, value in Heads field is auto-detected
and field is read only.
Sectors When Type is Auto, value in Sectors field is auto-detected
and field is read only.
Maximum Capacity This field is read-only and cannot be changed from BIOS
Setup.
Example: xxxxx MB
Multi-Sector Transfers
Disabled, 2, 4, 8, 16 sectors
Determines the number of sectors per block for multi-sector
transfers.
When Type is Auto, value in Multi-Sector Transfers field is
auto-detected and field is read only.
To Next Page
