XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 109
Doc. No. 8846 - Release 2.0
April 2005
If changing Class of Service via Service Code:
20-13-28: Class of Service Options (Supplementary Service) - Allow Station
COS to be Changed
Use this option to permit (1) or block (0) another extension from chang-
ing this extension’s Class of Service via Service Code 777.
Class of Service Options (Administrator Level), Program 20-07
Item
No.
Item Input Data Default Related
Program
COS 1 - 15
01 Manual Night Service Enabled
Enabled/disabled an extension’s ability to use
manual Night Service Switching
0- Off
1- On
011-10-01
02 Changing the Music on Hold Tone
Enable/disable an extension’s ability to change
the Music on Hold tone
0- Off
1- On
011-10-02
03 Time Setting
Enable/disable an extension’s ability to set the
Time via Service Code 828.
0- Off
1- On
111-10-03
04 Storing Abbreviated Dialling Entries
Enables/disables an extension’s ability to store
Abbreviated Dialling numbers. With this disabled,
an extension will display only the name assigned
to the Abbreviated Dialling number - the telephone
number will not be displayed. This could be used if
you wish to prevent Account Codes from being
displayed.
0- Off
1- On
111-10-04
05 Set/Cancel Automatic Transfer to Transfer 0- Off
1- On
111-10-06
06 - Not Used -
07 - Not Used -
08 - Not Used -
09 - Not Used -
10 Programmable Function Key Programming
(Appearance Level)
Enables/disables an extension’s ability to program
their Appearance function keys using Service
Code 852 (by default).
0- Off
1- On
1 20-13-18
11 Forced Trunk Disconnect (analogue trunk only)
Enables/disables an extension’s ability to use
Forced Trunk Disconnect
0- Off
1- On
0
12 Trunk port disable 0- Off
1- On
011-10-27
13 VRS Record
Enables/disable extension’s ability to record,
erase and listen to VRS messages
0- Off
1- On
1
To Next Page
Loading...
