NEC Xen Topaz - Private Line

Chapter 4 - 264 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
Private Line
• Description
A Private Line is a trunk reserved for a system phone for placing and answering calls. A
user with a Private Line always knows when important calls are for them. Additionally,
the user has their own trunk for placing calls that is not available to others in the
system.
A Private Line is one that is assigned to a single telephone, no other phones have
access to the line.
• Incoming only
The system phone has a Private Line only for incoming calls. The user
cannot place calls on the Private Line.
• Outgoing only
The system phone has a Private Line only for outgoing calls. The Private
Line does not ring for incoming calls.
• Both ways
The system phone has a Private Line for both incoming and outgoing calls.
Conditions
None
Default Setting
Disabled.
• Programming
14-07-01: Trunk Access Map Setup
Assign Private Line to the Private Line Access Map (1-51) (see Program
15-06 below). Use option 5 for Incoming, option 7 for Both Ways and
option 4 for Outgoing. In all other Access Maps, give option 3 to the Pri-
vate Line.
15-06-01: Trunk Access Map for Extensions
Assign extension to have Private Line to an unused “Private Line”
Access Map.
15-07-01: Programming Function Keys
Make sure extension has a line key (e.g., 012) for the Private Line.
22-02-01: Incoming Call Trunk Setup
Set the Trunk Service Type to 4 if routing unanswered Private Lines to
voice mail or 0 if not routing to voice mail.
22-04-01: Incoming Extension Ring Group Assignment
Assign extension to Private Line’s ring group. Set the ringing in Program
22-06 - use option 1 for Incoming or Both Ways Private Lines. Use
option 0 for Outgoing Private Lines. Do not assign any other extensions
to the Private Line ring group.
22-05-01: Incoming Trunk Ring Group Assignment
Assign Private Line to an unused “Private Line” ring group (1-25) (i.e., a
ring group just for the Private Line).