NEC Xen Topaz - Dial Number Preview

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 139
Doc. No. 8846 - Release 2.0 April 2005
Dial Number Preview
• Description
Dialling Number Preview lets a display system phone user dial and review a number
before the system dials it out. Dialling Number Preview helps the user avoid Dialling
errors.
Conditions
An extension user cannot edit the displayed number.
Default Setting
Enabled.
• Programming
20-06-01: Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
20-08-05: Class of Service Options (Outgoing Call Service) - Dial Number
Preview
In an extension’s Class of Service, enable (1) or disable (0) an exten-
sion’s ability to use Dial Number Preview.
• Related Features
• Central Office Calls, Placing
In order to place an outgoing call, an extension user must have outgoing access
to a line, loop or trunk group key.
•Operation
To use Dial Number Preview to place a call (system phone only):
1. Do not lift the handset or press a SPK key.
2. To preview any number, press *.
To preview an Abbreviated Dial number, press DC.
3. Dial number you want to call.
The number displays.
4. To dial out the displayed trunk number, press a line/loop/trunk group key.
If the previewed number as a trunk access code (e.g., 0), you can press CALL instead.
OR
To dial out the displayed Intercom number, press a SPK key.
OR
To cancel the number without Dialling it out, press HOLD.