NEC Xen Topaz - Page 119

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 111
Doc. No. 8846 - Release 2.0 April 2005
Class of Service Options (Outgoing Call Service), Program 20-08
Item
No.
Item Input
Data
Default Related
Program
COS1 -
15
01
Intercom Calls
Enable/disable Intercom calling for the extension.
0- Off
1- On
1
02 Trunk Calls
Enable/disable outgoing trunk calling for the
extension.
0- Off
1- On
1
03 Common Abbreviated Dialling 0- Off
1- On
1
04 Group Abbreviated Dialling 0- Off
1- On
1
05 Dial Number Preview
Enable/disable an extension’s ability to use Dial
Number Pre-view
0- Off
1- On
1
06 Toll Restriction Override
Enables/disables Toll Restriction Override
(Service Code 875).
0- Off
1- On
1 21-01-07
21-07
07 Repeat Redial
Enables/disables an extension’s ability to use
Repeat Redial.
0- Off
1- On
1
08 Toll Restriction Dial Block
Enable (1) or disable (0) an extension’s ability to
use Dial Block.
0- Off
1- On
0
09 Hotline/Extension Ringdown
Enables/disables Ringdown Extension for
extensions with this COS.
0- Off
1- On
0
10 Switching from Handsfree Answerback to Forced
Intercom Ringing
Enables/disables an extension’s ability to force
Handsfree Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0- Off
1- On
1
11 Protect for the call mode switching from caller
(Internal Call)
0- Off
1- On
0
12 Department Group Step Calling
Enables/disables an extension’s ability to use
Department Group Step Calling
0- Off
1- On
1
13 CLIP 0- Off
1- On
1
14 Call Address Information 0- Off
1- On
0