NEC Xen Topaz - Page 123

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 115
Doc. No. 8846 - Release 2.0 April 2005
16
Call Redirect
Enable or disable a system phone user’s ability to transfer a
call to a pre-defined destination (such as an operator, voice
mail, or another extension) without answering the call.
0- Off
1- On
0
17
Call transfer setup for each telephone group
0- Off
1- On
1
18
No Recall
Allow (0) or prevent (1) answered Transferred calls from
recalling the originating extension.
0- Off
1- On
0
19
Normal/Extended Park
Determine if an extension’s Class of Service should allow
either a normal or extended Park.
0-Normal
1-
Extende
0
20
Ring Inward recall disable 0
21
On-Hook Trunk to Trunk Transfer Restriction 0
Class of Service Options (Supplementary Service), Program 20-13
Item
No.
Item Input
Data
Default
COS1 - 15
01
Long Conversation Alarm
Enables/disables the Warning Tone for Long Conversation (not
for SLTs)
0- Off
1- On
1
02
Long Conversation Cutoff (Incoming)
Enables/disables an extension’s ability to use Long
Conversation Cut-off for incoming calls.
0- Off
1- On
0
03
Long Conversation Cutoff (Outgoing)
Enables/disables an extension’s ability to use Long
Conversation Cut-off for outgoing calls.
0- Off
1- On
0
04
Call Forwarding/DND Override
Enables/disables an extension’s ability to use Call Forwarding/
DND Override.
0- Off
1- On
1
05
Automatic Off Hook Signalling (for KST)/Call Waiting (for
SLT)
Allows a busy extension to manually (0) or automatically (1)
receive off hook signals.
0- Off
1- On
1
06
Automatic Off Hook Signalling
Allows a busy extension to manually (0) or automatically (1)
receive off hook signals.
0- Off
1- On
0
07
Message Waiting
Enables/disables an extension’s ability to leave Message
Waiting.
0- Off
1- On
1
08
Conference
Enables/disables an extension’s ability to initiate a conference
or Meet Me Conference.
0- Off
1- On
1
09
Privacy Release
Enables/disables an extension’s ability to initiate a Voice Call
Conference.
0- Off
1- On
1