NEC Xen Topaz - Page 129

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 121
Doc. No. 8846 - Release 2.0 April 2005
If required, use this program to define the single digit service code users
dial to Barge In to a Conference call.
14-01-04: Basic Trunk Data Setup - Transmit Gain Level for Conference and
Transfer Calls
CODEC gain set at 0 dB (14-01-04 = 32 [CODEC Gain Type 2] ) can be
used to set the CODEC gain type for multi-line Conference calls.
15-07-01: Programming Function Keys
Assign a function key for Conference (code 07).
20-06-01: Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
20-13-08: Class of Service Options (Supplementary Service) – Conference
In an extension’s COS, enable (1) or disable (0) the extension’s ability to
initiate a Conference.
20-13-15: Class of Service Options (Supplementary Service) - Barge In Ini-
tiate
In an extension’s COS, enable (1) or disable (0) the extension’s ability to
Barge In to a call.
20-13-16: Class of Service Options (Supplementary Service) - Barge In
Receive
In an extension’s COS, enable (1) or disable (0) the extension’s ability to
receive a Barge In on a call.
20-14-11: Class of Service Options For DISA - DISA Trunk Barge In
Determine if DISA users should have the ability to dial a service code to
Barge In to a Conference call (0=disabled, 1=enabled).
• Related Features
• Central Office Calls, Placing
Define the outgoing call options for each trunk and user.
• Conference, Voice Call
Set up a Conference with a co-worker in your immediate work area.
• Direct Inward System Access (DISA)
DISA users may use the Barge In feature on a Conference call if they know the
service code and are permitted in their DISA Class of Service.
• Meet Me Conference
Meet Me Conference lets an extension user set up a Conference via Paging.
• Meet Me Paging
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
• Programmable Function Keys
In order for system phone to have Conference, it must have a Conference func-
tion key.
• Tandem Trunking
A user can set up an Unsupervised Trunk-to-Trunk Conference and then drop out
of the call, allowing the remaining parties to continue the conversation.