Chapter 4 - 144 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0
April 2005
22-02-01 : Incoming Call Trunk Setup
For each Night Service Mode, enter service type 3 when the trunk
should be a DID trunk.
22-04-01 : Incoming Extension Ring Group Assignment
Assign extensions to Ring Groups. Calls ring the extensions according
to programming in 22-06.
22-09-01 : DID Basic Data Setup - Expected Number of Digits
For each DID Translation Table (1-20), enter the number of digits the
table expects to receive from the CO (8 maximum). For example, for a
table used with 3-digit DID service, enter 3.
22-09-02 : DID Basic Data Setup - Received Vacant Number Operation
Selectively enable (1) or disable (0) Vacant Number Intercept based on
each DID Translation Database (Program 22-11-01 and 22-11-02).
22-10-01 : DID Translation Table Setup
Assign the start and end range of DID Translation Table entries (1-2000)
to each DID Translation Table (1-20).
22-11-01 : DID Translation Table Number Conversion - Received Number
For each DID Translation Table entry (1-2000), specify the digits
received by the system (eight max.).
22-11-02 : DID Translation Table Number Conversion - Target Number
For each DID Translation Table entry (1-2000), specify the extension the
system dials after translation (36 digits max.)
22-11-03 : DID Translation Table Number Conversion - Dial-In Name
For each DID Translation Table entry (1-2000), specify the name that
should show on the dialled extension’s display when it rings (twelve
characters max.)
22-11-04 : DID Translation Table Number Conversion - Transfer Operation
Mode
For each DID Translation Table entry (1-2000), specify the condition
required to transfer to the call to the destination defined in 22-11-05 and
22-11-06.
22-11-05 : DID Translation Table Number Conversion - Transfer Destination 1
22-11-06 : DID Translation Table Number Conversion - Transfer Destination 2
For each DID Translation Table entry (1-2000), specify the first and sec-
ond Transfer Destinations if the callers receives a busy or no answer
(action defined in 22-11-04).
(Destination Options: 0 = No setting, 01-25 = Incoming Group, 101 =
DSPDB Voice Mail, 201-232: Department Group, 400 = VRS/AA, 401 =
DISA, 1000-1999 = Abbreviated Number (000-999))
If the Transfer Destinations are busy or receive no answer, those calls
are transferred to the final transfer destination (Program 22-10).
22-11-07 : DID Translation Table Number Conversion - Call Waiting (DDI
Camp On)
For each DID Translation Table entry (1-2000), specify whether Call
Waiting should be allowed (0=disable, 1=enable).
To Next Page
Loading...
