NEC Xen Topaz - Page 159

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 151
Doc. No. 8846 - Release 2.0 April 2005
•Operation
To answer a call on your Direct Inward Line:
1. Lift handset.
2. At system phone, press flashing line key for DIL.
If you don’t have a line key for the DIL, the DIL rings a CALL key.
If you have Ringing Line Preference, lifting the handset answers the call.
If you don’t answer the call, it may ring other extensions (i.e., the DIL No Answer Ring Group).
To place a call on your Direct Inward Line:
1. Lift handset.
2. At system phone, press line key for DIL
OR
Dial 805 and the DIL trunk number (e.g., 05).
OR
Dial 804 and the DIL trunk group number (e.g., 05).
OR
Dial 0 for Trunk Group Access
3. Dial number.