NEC Xen Topaz - Page 166

Chapter 4 - 158 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
Long conversation cutoff is controlled separately for DISA.
• Voice Response System (VRS)
Department Calling with Overflow Message requires a DSP daughter board for
VRS.
• Operation
To place a DISA call into the system (from any DTMF dial telephone):
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension (200-295).
OR
Dial 0 for Trunk Group Routing or ARS.
OR
Dial Alternate Trunk Route Access Code (if enabled).
OR
Dial 804 + a trunk group number (1-25) for an outside call.
OR
Dial 805 + a trunk number (1-51) for an outside call.
OR
Dial 813 + Common Abbreviated Dialling bin number.
OR
Dial 9 for the operator.
OR
Dial 801 + an Internal Paging Zone number (0, 1-6,00,01~32).
OR
Dial 803 + an External Paging Zone number (1-2 or 0 for All Call).
OR
Dial 810 + a busy extension number to barge in to a call.
OR
Dial 828 to set the time + two digits for two digits for hour (24 hour clock, 13=1:00 PM) + two
digits for minutes.