Chapter 4 - 174 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0
April 2005
C. Since making changes in Program 11-01 does not automatically make any other
changes in any other program, changing the number plan after the system is in
operation may cause problems in the following programs:
D. Any feature which requires Dialling a code or extension number can be affected.
Default Setting
Extensions are numbered consecutively (Program 11-02 and 11-04) from:
200 (port 01) to 223 (port 24)
• Programming
11-01-01: System Numbering
Customise the system’s internal (Intercom) numbering plan.
11-02-01: Extension Numbering
Assign extension numbers to extension ports. The telephone’s program-
ming identity follows the port number - not the extension number.
11-09-01: Trunk Access Code
Assign the single-digit trunk access code (normally 0) for ARS/Trunk
Group Routing.
11-10-01: Service Code Setup (for System Administrator)
11-11-01: Service Code Setup (for Setup/Entry Operation)
11-12-01: Service Code Setup (for Service Access)
Customise the Service Codes.
11-16-01: Single Digit Service Code Setup
Assign the Single Digit (post-dialling) Service Codes.
• Related Features
None
11-01 Type 2 (Extension Number)
11-02 11-04 11-06 11-07
11-08 15-01-01 15-07 15-12
15-14 21-11
11-01 Type 1 (Service Codes)
11-10 11-11 11-12 11-15
15-14 21-11 30-03
To Next Page
Loading...
