XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 217
Doc. No. 8846 - Release 2.0
April 2005
• Direct Inward Dialling (DID) / Direct Inward Line (DIL) / Direct Inward
System Access (DISA)
Transferred DID, DIL, and DISA calls do not require ring group programming.
•Operation
To place a call on a loop key:
1. Press outgoing or both ways loop key.
You hear dial tone and the key lights green.
2. Dial number.
To answer a call on a loop key:
Listen for ringing a look for a flashing loop key.
1. Press loop key.
The key lights green and you connect to the call.
If there are additional calls waiting to be answered, your display shows:
WAITING - LOOP KEY
To program a loop key:
1. Press the SPK key.
2. Dial 852.
3. Press the key you want to program as a loop key.
4. Dial *05.
5. Dial the loop key type:
0 = Incoming only
1 = Outgoing only
2 = Both ways (incoming and outgoing)
6. Dial the loop key routing option for incoming, outgoing, or incoming and outgoing calls:
000 = Trunk Group Routing or ARS (if installed)
01-25 = Trunk Groups
If you selected option 2 in step 5 above, enter the incoming Trunk Group followed by the outgoing Trunk
Group.
7. Press SPK to hang up.
To Next Page
Loading...
