NEC Xen Topaz - Page 348

Chapter 4 - 340 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
14-09-01: Conversation Recording destination for trunks
Recording destination dial number - for DSPDB Voice Mail enter code in
command 11-12-39
14-09-02: Automatic Recording
Defines whether to automatically record on call answer (0 = no, 1 = yes).
14-09-03: Recording contents storing method
0 = specifies by dialling, 1 = own mailbox. If set to 0 the voice mail will
‘call back’ and require a mailbox be entered to store recording.
14-09-04: Automatic recording for outgoing call
Defines whether outgoing calls are automatically recorded (0 = off, 1 =
on).
15-07-01: Programmable function keys
Setup voice mail related function keys on your keyphone or DSS/DLS
console to allow more efficient use of Voice Mail.
Code 67 + mail box number - Mail box key for direct access to mailbox
Code 68 + 0 - Voice Mail service - skip message forward and replaying
Code 68 + 1 - Voice Mail service - skip message backward and replay-
ing
Code 69 + 0 - Conversation record - Start and stop manual conversation
record
Code 69 +1 - Conversation record - Delete a recorded conversation and
re-record
Code 69 + 2 - Conversation record - Cancel call record and delete
Code 70 + mail box number - Auto Attendant setting, set call forward to
DSPDB Voice Mail.
Code 71 + mail box number - Switch answering message, select one
15-12-01:Conversation recording destination for extensions
Recording destination dial number - for DSPDB Voice Mail enter code in
11-12-39. If both programs 14-09 and 15-12 define a destination, the
destination in 15-12 will be used.
15-12-02: Automatic recording for extensions
Defines whether to automatically record trunk calls on answer (0 = no 1
= yes).
15-12-03: Recording contents storing method
0 = specifies by dialling, 1 = own mailbox. If set to 0 the voice mail will
‘call back’ and require a mailbox to be entered to store recording.
15-12-04: Automatic recording for outgoing call
Defines whether outgoing calls are automatically recorded.
20-06-01: Class of Service for Extensions
Assign a Class of Service (1-15) to extensions.
20-07-13: Class of Service Options (Administrator Level) - VRS Record
In an extension’s Class of Service, enable (1) or disable (0) the exten-
sion’s ability to record, erase and listen to VRS messages.