NEC Xen Topaz - Page 385

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 377
Doc. No. 8846 - Release 2.0 April 2005
2. Dial 712.
3. Dial 3 (Erase).
4. Press HOLD to cancel without erasing (System Phone only).
5. Hang up.
Personal Greeting
To enable a Personal Greeting:
1. Press the SPK key or lift handset, and
Dial 713.
-OR-
Press the Call Forwarding (Device) key (SC 851:17).
2. Dial 7.
3. Record your Personal Greeting, or
if you already have Personal Greeting or Park and Page set up, you can dial:
7 to re-record
5 to listen (then # to listen again)
3 to erase (press HOLD to cancel erase)
4. Dial # + Personal Greeting condition:
2 = Busy/No Answer
4 = Immediate All Calls
6 = No Answer
5. Dial the destination to receive your calls. The destination can be:
6. A co-worker’s extension.
7. Your Voice Mailbox (by dialling the Voice Mail master number).
8. Off-premise via Common Abbreviated Dialling (by entering 813 + bin).
9. Greeting without forwarding so caller hears busy (by entering your extension number).
10.You cannot forward to a Department Group pilot number.
11.Dial Personal Greeting type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
12.Hang up.
Your DND or Call Forwarding (Device) Programmable Function Key flashes when Call
Forwarding is activated.
To cancel your Personal Greeting:
1. Press the SPK key or lift handset.
2. Dial 713 + 73.
3. Hang up.
Park and Page
To have the System Page you when you have a Call:
1. Press the SPK key or lift handset, and
Dial 713.
-OR-
Press the Call Forwarding (Device) key (SC 851:17).
2. Dial 7.