NEC Xen Topaz - Page 56

Chapter 4 - 48 Features
NEC Business Solutions Ltd XEN Topaz
Doc. No. 8846 - Release 2.0 April 2005
To dial a Common/Personal Abbreviated Dialling number:
1. Press SPK key (or lift handset).
2. Dial *.
-OR-
Press DC key.
-OR-
Press Common/Personal Abbreviated Dialling key (PGM 15-07 or SC 851: 27).
To preselect, press a line key in step 1 (instead of CALL) before pressing the DC or Abbrevi-
ated Dialling key).
3. Dial Abbreviated Dialling bin number.
Common=000-899,
Personal=900-919.
The stored number dials out. Unless you preselect, Trunk Group Routing selects the trunk for
the call. The system may optionally select a specific Trunk Group for the call. If you have a
DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To dial a Group Abbreviated Dialling Number:
1. Press SPK key (or lift handset).
2. Dial 814.
-OR-
Press DC key.
-OR-
Press Group Abbreviated Dialling key (PGM 15-07 or SC 851: 28).
To preselect, press a line key in step 1 (instead of CALL) before pressing the DC or Abbrevi-
ated Dialling key).
3. Dial Abbreviated Dialling bin number.
Group=000-1999 (not set in default).
The stored number dials out. Unless you preselect, Trunk Group Routing selects the trunk for
the call. The system may optionally select a specific Trunk Group for the call. If you have a
DSS Console, you may be able to press a DSS Console key to chain to a stored number.
To Check an Abbreviated Dialling number (display system phone only):
1. Press CHECK.
2. Press DC.
3. Dial the Abbreviated Dialling bin number.
If the entire stored number is too long for your phone’s display, press * to see the rest of it.
4. Press CLEAR.
-OR-
1. Press CHECK.
2. Press the Common/Personal/Group Abbreviated Dialling key.
If the entire stored number is too long for your phone’s display, press * to see the rest of it
3. Press CLEAR.