XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 73
Doc. No. 8846 - Release 2.0
April 2005
12. Dial Call Forwarding type:
2 = All calls
3 = Outside calls only
4 = Intercom calls only
13. Press SPK to hang up (hang up at SLT).
Note: When using a Call Forward – Select key (PGM 15-07 or SC851 : 16), the
last call forward setting made with this key (i.e., call forward type and
destination) can be repeated by pressing this key and waiting for 5 seconds.
A confirmation tone will be heard once the call forward is set. To cancel the
call forward setting, press this key and again wait for 5 seconds.
To Next Page
Loading...
