NEC Xen Topaz - Page 89

XEN Topaz NEC Business Solutions Ltd
Features and Specifications Manual Chapter 4 - 81
Doc. No. 8846 - Release 2.0 April 2005
• Call Forward, Off Premise
Call forward codes can be used to forward to a specific outside number.
• Doorphone
Doorphones must be programmed in order for the calls to be transferred off-
premise.
• Toll Restriction
The outside number Call Forwarding dials can only be a number normally allowed
by the forwarded extension’s Toll Restriction.
• Voice Response System (VRS)
In systems with a DSP daughter board for VRS, callers to an extension forwarded
off-premise hear, “Please hold on, your call is being rerouted.”
• Programming
11-10-04: Service Code Setup - Storing Common Abbreviated Dialling Num-
bers
Assign the service code to be used for Common Abbreviated Dialling
(853 by default).
11-10-18: Service Code Setup - Off-Premise Call Forward by Doorphone
Assign the service code to be used for Off-Premise Calling Forwarding
by a Doorphone (822 by default).
14-01-13: Basic Trunk Data Setup - Loop Supervision
Enable (1) loop supervision for each trunk that should be able to use
Call Forwarding Off-Premise.
15-07-01: Programmable Function Keys
For one-touch access to the Call Forwarding setup codes (843, 844,
845, 848), assign a function key (10, 11, 12, 13) for Call Forwarding. For
Off-Premise Call Forwarding by a Doorphone, assign a function key (54)
if required.
20-06-01: Class of Service for Extensions
Assign Class of Service (1-15) to an extension.
20-11-12: Class of Service Options (Hold/Transfer Service) - Call Forwarding
Off- Premise
In an extensions Class of Service, enable (1) or disable (0) setting up
Call Forwarding Off-Premise at the extension.
32-01-03: Doorphone Timers - Off-Premise Call Forward by Doorphone Dis-
connect Timer
Define the conversation period for an Off-Premise Call Forward by Door-
phone call. When this timer expires, the caller will hear busy tone for 3
seconds (fixed timer) and the call will then be disconnected (0-64800).
•Operation
To activate Call Forwarding Off-Premise
1. At system phone, press a SPK key + Dial 848.
OR
Press Call Forward key (PGM 15-07 or SC 851: 10)
OR
At SLT, lift handset Dial 848.