Nedap AEOS Blue User Manual

Installation and Configuration | AEOS Blue and vehicle identification EN
Manual version 3 22/48
3. Right-click the StandardDoor AEbc, and click Properties.
4. Open the Identifier type editor and select Generic.
5. Set the Format to
Binary.
6. Check the other settings, see the example below. Click
OK.
The identifier type settings must match the settings in AEOS, see section 3.5.
7. Press CTRL+E and click Yes to deploy the configuration.

Nedap AEOS Blue Specifications

General

Brand	Nedap
Model	AEOS Blue
Category	Controller
Language	English