60
Settings
You can access settings by rotating the roller in the
main menu until Settings are highlighted in red on
the text display. Acknowledge the selection by
pressing the roller or wait for automatic acceptance
after 3 seconds.
Signal intensity Select this option to set the volume of the signal.
The higher the intensity, the quicker the signal
sequence.
Signal duration Select this option to set the duration of the signal.
After selecting this option, set the required signal
duration with the roller.
The signal can be terminated by touching
the
) button.
Signal OFF (ON) Select this option to switch off the signal completely.
To switch on the signal again, select Signal ON.
Select language Select this option to select a new operating language.
The following languages are available: Deutsch
English
Français
Italiano
Nederlands
Español
ΣΛΛΗΑΝΙΚΑ
Attention: The language is changed immediately
following acknowledgement by pressing the roller.
We recommend setting only those languages which
you understand.
Inadvertently set the wrong language?
Switch the appliance off.
Touch the
$ button for 5 seconds.
The selectable languages are indicated again on the
text display.
Clock display OFF (ON) Select this option to switch the clock display off.
To switch the clock display on again, select Clock
display ON.
To Next Page
Loading...
Need help?
General