Nemaxx 330 - (WINTER) STORAGE

[
EN ● 20
]
Version: 1.2
KEN002ZB 02.02.2020
IMPORTANT To avoid discoloration of boat skin or hoses due to vegetation or polluted waters, DO NOT leave
the boat in the water for extended periods of time.
● After each operation, the boat and all parts should be washed with mild soap and rinsed with fresh water.
All parts should be allowed to dry before storage in a carrying bag. This prevents stick or mildew stains.
● Before storing, make sure that the product is absolutely dry.
● To keep the boat looking good, store it in a cool, dry interior and protect it from direct sunlight. Protect the
boat from rodents and other damage that could damage the material.
● Theproductcanalsobestoredintheinatedstate,butinthiscasedonotplaceheavyorsharpobjectson
it. It is not recommended that the vessel be suspended.
● If you store the boat for a long time, do not store it in the pack (or sack) provided. The boat is folded too
tightly in the pack, resulting in sharp folds in the material. Roll up or fold the boat loosely and store it in a dry
place. To prevent damage to the boat during storage, do not place heavy objects on the boat.
● (WINTER) STORAGE