EasyManua.ls Logo

neomouv PLIMOA - 3.2 Battery information and removal

neomouv PLIMOA
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.2 Battery:
Your battery has a serial number: This is situated either under the battery or in the black plastic recess.
Your battery is assembled and fitted into a specialized housing. We strongly advise against attempting to
open or dismantle the battery. Any tears in the warranty label shall ipso facto invalidate the
warranty.
To remove the battery from the carrier, you must unlock it with the locking key. Use then the handle to
remove the battery from the back of the ebike.
Ensure that the battery box is well positioned in the guide rail before pushing it home.
You can charge your battery leaving it on the ebike (put the switch of the gauge to «OFF» before). You can
also remove it from the carrier and charge it using the same socket at the back of the battery.
For a safe charging, you must first connect the charger to the battery and then connect the charger plug to
the sector (220V / 50Hz).
Check the operation of the charger (See: paragraph 3.1).
Locking key
Manual PLIMOA
21

Related product manuals