1- SETTINGS / INSTALLATION
1.1 Saddle settings :
ļ Allen key 6 mm
1.1.1 Adjusting the saddle:
Loosen the nut under the saddle
Adjust the angle of the saddle, in order to get the best for your comfort position. Tighten the nut (tightening
torque 25 Nm).
1.1.2 Saddle height:
The e-bike allows the saddle to be set lower than on a traditional bicycle. Thanks to the electric assistance,
you expend less effort and can therefore take a lower, more secure sitting position. For optimal use of the
bike, the height of the user (cyclist) should be between 1.65m and 1.90m. Therefore, you should adjust the
height of the saddle in the seated position by following these steps:
Release the quick-release seat clamp.
When sitting in the saddle and wearing specialist cycling shoes, place one pedal in its lowest position. Place
one heel on a pedal: your leg should be able to extend normally without becoming stiff. Raise or lower the
saddle to achieve the optimal saddle height. When pedalling, you should not have to swing your hips from
side to side.
Lock the quick release clamp.
To Next Page
Loading...
