Need help?Do you have a question about the Neptronic SKE4 and is the answer not in the manual?
Assumes familiarity with BACnet concepts and terminology for effective communication.
Details advantages like quick message transmission, MS/TP support, BIBB, object, and alarm support.
Configure BACnet without programming by ensuring unique MAC address and powering up.
Manually configure device, BACnet server, and MSTP/IP settings via the controller.
Explains unique MAC address requirement and optimizing Max_Master for MS/TP network efficiency.
Specifies default port 47808 (0xBAC0) for IP communication and alternatives.
Describes how to reset the humidifier via BACnet using Reinitialize Device service (Warm/Cold Reset).
Details supported properties and notes for Analog Input (AI) object types.
Details supported properties and notes for Analog Output (AO) object types.
Details supported properties and notes for Analog Value (AV) object types.
Details supported properties and notes for Binary Input (BI) object types.
Details supported properties and notes for Binary Output (BO) object types.
Details supported properties and notes for Binary Value (BV) object types.
Details supported properties and notes for Character String Value (CV) object types.
Details supported properties and notes for Multi State Value (MSV) object types.
Covers miscellaneous object types not fitting into standard categories, like program objects.
General| Model | SKE4 |
|---|---|
| Type | Steam Humidifier |
| Phase | 1 |
| Dimensions | 7.75 x 15 x 6.5 in |
| Weight | 9 lb |
| Operating Humidity Range | 5 to 95% RH, non-condensing |
| Capacity | 1.3 kg/h (2.9 lb/h) |
To Next Page
