Neptronic SKE4 - Supported BACnet Object Types

SKE4 Steam Humidifier
BACnet Communication Module User Guide
www.neptronic.com
Page | 6
Object Types Supported
The following table lists all the BACnet properties supported for each object type. Most of the properties are locked.
The exception is Present_Value, which represents the dynamic operating values of the device, and the Status_Flag,
Event_State, and Reliability properties, which reflect the availability of the Present_Value. Unless otherwise specified,
properties are not changeable.
Table 3 - Object Types Supported
Object
Type
Enabled
Optional Properties
Supported
Writable Properties
Notes
Note: Writable properties are different for some objects. Refer to the respective Object Table information to know the writable property for objects.
Analog
Input

• Reliability
• Description
• Min_Present_Value
• Max_Present_Value
• Resolution
• COV_Increment
• Out_of_Service
• COV_Increment
• Units
If "Out_of_Service" is true, Present_Value becomes
a writable property. Refer to Out_of_Service
Property section on page 7 for more information.
Analog
Value

• Reliability
• Description
• Min_Present_Value
• Max_Present_Value
• Resolution
• COV_Increment
• Priority_Array
• Relinquish_Default
• Present_Value
• Out_of_Service
• COV_Increment
• Relinquish_Default
• Units
Refer to Out_of_Service Property section on page 7
for more information.
Analog
Output

• Description
• Reliability
• Min-Pres-Value
• Max-Pres-Value
• Resolution
• COV_Increment
• Present_Value
• COV_Increment
• Out_of_Service
• Relinquish_Default
• Units
Binary
Input

• Reliability
• Active_Text
• Inactive_Text
• Description
• Out_of_Service
• Polarity
• If "Out_of_Service" is true, Present_Value
becomes a writable property. Refer to
Out_of_Service Property section on page 7 for
more information.
Binary
Value

• Reliability
• Active_Text
• Inactive_Text
• Description
• Priority_Array
• Relinquish_Default
• Minimum_Off_Time
• Minimum_On_Time
• Present_Value
• Out_of_Service
• Relinquish_Default
• Minimum_Off_Time
• Minimum_On_Time
Refer to Out_of_Service Property section on page 7
for more information.
Binary
Output

• Description
• Reliability
• Inactive-text
• Active-text
• Minimum_Off_Time
• Minimum_On_Time
• Present_Value
• Out_of_Service
• Polarity
• Relinquish_Default
• Minimum_Off_Time
• Minimum_On_Time
Device

• Max_Master
• Max_Info_Frame
• Description
• active-COV-subscriptions
• Local_Time
• Local_Date
• UTC_Offset
• Daylight_Savings_Status
• Backup_Failure_Timeout
• Configuration_Files
• Last_Restore_Time
• Backup_And_Restore_State
• Backup_Preparation_Time
• Restore_Completion_Time
• Restore_Preparation_Time
• Location
• Serial_Number
• Profile_Name
• Object_Identifier
• Object_Name
• Max_Master
• Description
• Local_Time
• Local_Date
• UTC_Offset
• Daylight_Savings_Status
• Apdu_Timeout
• Backup_Failure_Timeout
• Location
File

• Description
File_Size
Only 0 is the accepted value to be written to the file
size.
Group
• Description