Ness IQ - Motion Event

Digital Video Recorder for Ness IQ-
Series
3.6.1 Alarm In
 Please click (

 )
LINK>Alarm In and the following screen will appear.
 Select cameras for recording while the
alarm in
notification.
 Link Notification displays E-
mail addresses registered in DEVICES>Network>Notification.

Please follow the setup procedures below.
① Click (

 )
Alarm In frame and select Alarm In 1.
②
Select cameras for recording when Alarm In 1 is on. Please check
cameras can be set.
③
Select alarm outputs to be worked when Alarm In 1 is on. Please check
More than two alarm outputs can be set.
④ Select E-
mail addresses for notification when Alarm In 1
than two E-
mail addresses can be set.
⑤ Repeat the abo
ve procedure for Alarm In 2~ Alarm In 16
 Choose ‘OK’ to confirm the setting.
3.6.2 Motion Event
 Please click (

 )
LINK>Motion Event and the following screen will appear.
 Select cameras for recording
while the motion sensor is in operation and alarm outputs and set up E
notification.
 Link Notification displays E-
mail addresses registered in DEVICES>Network>Notification.

Please follow the setup procedures below.
① Click (

 ) Motion Eve
nt frame and select Motion Event 1.
②
Select cameras for recording when Motion Event 1 is on. Please check
two cameras can be set.
Series
960H & SDI DVR
LINK>Alarm In and the following screen will appear.
alarm in
sensor is in operation and alarm outputs and set up E
mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
Alarm In frame and select Alarm In 1.
Select cameras for recording when Alarm In 1 is on. Please check

a check box under Link Camera. More than two
Select alarm outputs to be worked when Alarm In 1 is on. Please check

a check box under Link Alarm Out
More than two alarm outputs can be set.
mail addresses for notification when Alarm In 1
is on. Please check 
a check box under Link Notification. More
mail addresses can be set.
ve procedure for Alarm In 2~ Alarm In 16
(Up to 2 4 /8 Channels and
Up to 16 for
LINK>Motion Event and the following screen will appear.
while the motion sensor is in operation and alarm outputs and set up E
mail addresses registered in DEVICES>Network>Notification.
Please follow the setup procedures below.
nt frame and select Motion Event 1.
Select cameras for recording when Motion Event 1 is on. Please check

a check box under Link Camera. More than
Page
48
sensor is in operation and alarm outputs and set up E
-mail addresses for
a check box under Link Camera. More than two
a check box under Link Alarm Out
or R1~2.
a check box under Link Notification. More
Up to 16 for
16 Channel).
while the motion sensor is in operation and alarm outputs and set up E
-mail addresses for
a check box under Link Camera. More than