16
NESS R8 CONTROL PANEL - USER MANUAL
OPERATION - DOORBELL
DOORBELL
If a Ness Radio Doorbell has been installed,
simply press the button once.
The doorbell tune is heard through the R8
onboard siren. The doorbell volume and the
tune can be set by the user.
100-056 Radio
Doorbell transmitter.
100-664 Radio Key.
Press
Hold
If enabled by your installer, to sound the
Doorbell, press and hold the Radio Key
PANIC button for at least 4 seconds.
IMPORTANT NOTE: The R8 normally
processes signals from the Radio Key Panic
button as a PANIC alarm. The panel must be
programmed by your installer to process
this signal as a DOORBELL signal.
See pages 24 & 25 for doorbell volume and dorrbell tune programming.
To Next Page
Loading...
Need help?
General
