22
NESS R8 CONTROL PANEL - USER MANUAL
PROGRAMMING
Various system options can be
programmed by the user. These options
can only be accessed from Program Mode.
User Codes or Radio Keys can be added
or deleted. Up to 15 keypad user codes or
14 Radio Keys or a mixture of both can be
programmed.
Entry and Exit timers can be changed if
necessary, (between 1 and 99 seconds).
The Doorbell Tune and Volume can be
programmed.
For all other programming changes, talk to
your installer.
The panel will automatically exit
Program Mode if no buttons are pressed
for 4 minutes.
The factory default
Master Code is: 123
T ENTERo Program Mode
T EXITo Program Mode
[Master Code]
To Next Page
Loading...
