Need help?Do you have a question about the Ness R16 and is the answer not in the manual?
General| Brand | Ness |
|---|---|
| Model | R16 |
| Category | Control Panel |
| Language | English |
Details electromagnetic compatibility standards and compliance.
Lists telecommunication compliance standards.
Outlines safety standards for information technology equipment.
Explains audible beeps and visual display feedback from the keypad.
Details the meaning of display icons in operating mode.
Describes the different operational states of the R16 control panel.
Explains the causes and handling of system alarms.
Details how to stop sirens and reset the panel after an alarm.
Provides a quick reference for common operations using keypad and radio key.
Explains the procedures for arming the alarm system via keypad or radio key.
Details how to operate the system in Monitor Mode.
Explains the procedures for disarming the alarm system via keypad or radio key.
Describes how to activate the panic alarm using the keypad or radio key.
Explains how to activate a silent duress alarm for security.
Details how to trigger a fire alarm from the keypad.
Describes how to trigger a medical alarm from the keypad.
Explains how to use the radio doorbell transmitter and its functions.
Details the procedure for temporarily excluding specific zones from system arming.
Explains how to access and view the system's event log.
Shows the display icons used when reviewing system events.
Explains how the system communicates with a central monitoring station.
Details the system's capability for audible alarm reporting to private phones.
Describes audible cues for valid and invalid remote commands.
Lists the telephone commands for remote system control.
Lists configurable options, default settings, and programming codes.
Step-by-step guide to program a radio doorbell transmitter.
Instructions on how to adjust the doorbell's volume level.
Guide on selecting and programming doorbell tunes.
Detailed steps for programming Ness radio keys into user slots.
Instructions for removing programmed radio keys from the system.
Explains how to send learning signals from transmitters to the panel.
Details additional settings for radio keys and doorbell transmitters.
Step-by-step guide to add or change user keypad codes.
Instructions for removing keypad codes from the system.
Important notes and restrictions regarding keypad code programming.
How to set the entry delay timer for zones.
How to set the exit delay timer for arming the system.
To Next Page
