Ness R16 User Manual

NESS R16 CONTROL PANEL - USER MANUAL
15
OPERATION - EMERGENCY FUNCTIONS
FIRE ALARM
To generate a FIRE alarm using the keypad, press
and hold the FIRE key, (left hand star key), for
at least 2 seconds.
The FIRE Alarm cannot be generated
by a Radio Key.
The Keypad Fire alarm function is disabled by default,
and must be enabled by your installer.
Hold
The FIRE alarm sounds the siren outputs using the Fire siren sound and the dialler reports a fire
alarm.
MEDICAL ALARM
To generate a MEDICAL alarm using the keypad,
press and hold the MEDICAL key, (right hand star key),
for at least 2 seconds.
The Keypad Medical alarm function is disabled
by default, and must be enabled by your installer.
If enabled by your installer, to generate a
alarm usingMEDICAL a Radio Key, press
and hold the Radio Key PANIC button for
at least 4 seconds.
IMPORTANT NOTE: Your installer must
program the R16 to enable Radio Key Panic
to act as the MEDICAL alarm. This means
Radio Key Panic will no longer be available.
Hold
Hold
The primary purpose of this alarm is to report a MEDICAL alarm to your central station. The keypad
beeper sounds 8 rapid beeps to indicate that the Medical alarm has been triggered.

Ness R16 Specifications

General

Brand	Ness
Model	R16
Category	Control Panel
Language	English