OPERATION - EMERGENCY FUNCTIONS
The DURESS alarm can be used to send a silent
alarm to the Central Station that you are being
forced to disarm the panel against your will. That
is; you are disarming under “duress.”
To Disarm and send a DURESS alarm, prefix your
User Code with the digit 9 when Disarming.
* DURESS ALARM IS NORMALLY NOT
ENABLED. TO ENABLE THE DURESS
FUNCTION, CONSULT YOUR INSTALLER
* DURESS ALARMS CAN ONLY BE USED
IF YOUR SYSTEM IS MONITORED BY A
CENTRAL STATION.
* THE DURESS ALARM DOES NOT
SOUND ANY SIREN OUTPUTS AND CAN
ONLY BE REPORTED BY DIALLER TO
YOUR CENTRAL STATION.
DURESS ALARM
To generate a DURESS alarm using the keypad,
add the digit '9' in front of your code when disarming.
The Keypad Duress function is disabled by default,
and must be enabled by your installer.
If enabled by your installer, to generate a
DURESS alarm using a Radio Key, press
and hold the Radio Key PANIC button for
at least 4 seconds.
IMPORTANT NOTE: Your installer must
program the R16 to enable Radio Key Panic
to act as the DURESS alarm. This means
Radio Key Panic will no longer be available.
[User Code]9
Hold
To Next Page
Loading...
Need help?
General
