Need help?Do you have a question about the Ness D-16 and is the answer not in the manual?
General| Brand | Ness |
|---|---|
| Model | D-16 |
| Category | Control Panel |
| Language | English |
Comprehensive list of the NESS D16 alarm control panel's key capabilities and functions.
Layout and terminal connections for the main D16 control panel board.
Diagrams illustrating different methods for connecting detection zones to the D16 panel.
Wiring examples for connecting detectors without using the zone splitting feature.
Wiring examples for connecting detectors using the zone splitting feature for 16 zones.
Summarizes how to perform basic functions like Arming, Disarming, and Monitor Mode.
Provides step-by-step guides for initial setup of the panel for common scenarios.
Explains the differences between Installer, User, and Normal Operating Modes.
Details on setting and managing user codes for panel operation, including Arm Only.
Adjusting sensitivity levels for vibration sensors connected to each zone.
Assigning specific types (Instant, Delay, etc.) to each of the 16 zones.
Dividing the 16 zones into two independent partitions (Area 1 and Area 2).
Linking user codes to Area 1, Area 2, or both, for partitioned control.
Defining which zones trigger Sonalert, Strobe, Siren, Reset, AUX1, or AUX2 outputs.
Enabling keypad shortcuts for memory display, zone exclude, monitor mode, etc.
Configuring Monitor Mode output mapping for different alarm events.
Splitting zone inputs 1-8 into pairs to create 16 wired zones.
Setting up primary and secondary telephone numbers for reporting.
Allowing remote upload/download or control via telephone or computer.
Instructions on accessing Installer and User Program modes via keypad or power-up.
Enabling and managing flexible temporary day zone selections.
Configuring Day Mode output mapping for different alarm events.
Assigning account numbers for panel identification by the central station.
Restoring all programmed options to their original factory default values.
Assigning user codes to be programmable as radio codes.
Guide to learning and assigning radio devices to zones.
Simplified procedure for programming radio keys and devices.
How different radio devices function with the D16 panel.
Step-by-step guide for assigning radio keys to user codes.
Ensuring correct operation of Ness Radio PIRs through supervision signals.
Enabling the D16 Output Expander for additional outputs.
How the D16 sends audible alarm reports via DTMF telephone.
Instructions for remotely controlling the panel using a DTMF telephone.
To Next Page
