EasyManuals Logo

Ness D-16 User Manual

Ness D-16
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
6363
6363
63
NESS D16 (V4.6) CONTROL PANEL - INSTALLER MANUAL
P101E - P116E
P88E
P89E
P96E
P97E
P98E
P99E
P91E
P94E
P95E
P90E
P118E
P119E
P117E
P87E
P85E
P86E
P83E
P84E
OPTION DESCRIPTION DEFAULT PAGE OPTION DESCRIPTION DEFAULT PAGE OPTION DESCRIPTION DEFAULT PAGE
Follow Me Tel. No. none 1E Monitor to RESET OP OFF 28 Test Call Interval
84=168hrs
RadioKey Enable Codes 1-8
none 2E Monitor to STROBE OP OFF Time before next Test Call
6=12 hours
RadioKey Enable Codes 9-15
none 3E Monitor to SONALERT OFF
1E
Auto Dialling, Pulse & DTMF
ON
44
User Code 1 (Master) 123 4E Monitor to SIREN OFF
2E Pulse Dialling always OFF
User Codes 2-15 none 5E Day Mode to RESET OP ON
3E DTMF Dialling always OFF
Entry Delay Time 1 20 sec 6E Day Mode to STROBE OP ON 1E Disable Dialler OFF 45, 46
47
48, 49
50, 51
52, 53
Entry Delay Time 2 6=60 sec 7E Day Mode to SONALERT OFF 2E Contact ID format ON
Exit Delay Time 60 sec 8E Day Mode to SIREN OFF 3E Audible DTMF format OFF
Siren Reset Time 5 min 1E Brief Monitor Alarm OFF
OFF
29, 30
31
4E Audible PULSE Format OFF
Normal Zone Sens all zones 2E Brief Day Alarm 5E
Contact ID + Audible DTMF
OFF
Vibration Sens. Z1-8 none 3E
Monitor Zones Entry Delay2
ON 6E
Contact ID + Audible PULSE
OFF
DoubleTrigger Zones none 4E Radio Key Chirp & Flash OFF 1E
Split Dial Pri/Sec Phone Nos.
OFF
Instant Zones
Zones 3-16
5E 50Hz Mains Frequency ON 2E Check for Dial Tone ON
Entry Delay 1 Zones Zone 1 6E Double Key Keypad Panic ON 4E 4 Dialling attempts ON
Handover Zones Zone 2 7E Keypad Fire Alarm OFF 1E AREA 1 Open/Close reports OFF
Entry Delay 2 Zones none 8E Keypad Medical Alarm OFF 2E AREA 2 Open/Close reports OFF
Lockout Zones All zones Supervised Radio Zones none 3E Siren Chirp on Kiss-off OFF
AREA 1 Zones All zones 1E Supervision RESET output OFF 32, 33
31
35
36, 37
38, 39
40
40
40
40
42, 43
4E Flash Strobe on Kiss-off OFF
AREA 2 Zones none 2E
Supervision STROBE output
OFF 5E Forced Opening report ON
AREA1 Codes 1-8 All codes 3E Supervision SONALERT OFF 6E Delayed Closing Reports OFF
AREA1 Codes 9-15 All codes 4E Supervision SIREN output OFF 7E Manual Exclude Reports ON
AREA2 Codes 1-8 Code 1 5E Supervision AUX1 output OFF 8E Auto Exclude Reports ON
AREA2 Codes 9-15 none 6E Supervision AUX2 output OFF 1E Enable Test Calls ON
Monitor Mode Zones none 7E Supervision SpeedUp x 6 OFF 2E Mains Report Delay ON
24hr Zones none 8E Supervision SpeedUp x10 OFF 3E Listen-In to Dialler OFF
Day Zones none Supervision Time 24 hours 4E Swinger shutdown ON
Reset OP Zones All zones 1E ZONE SPLIT OFF 5E Line Fault Monitor OFF
Strobe Zones All zones 2E 3K3 Zone Resistors OFF 6E
7E
Line Fault to AUX2
Internal clock timing
OFF
OFF
Sonalert Zones All zones 3E Radio Panic Toggles AUX1 OFF
1E Enable Up/Download OFF
Siren Zones All zones 4E Radio Panic Pulses AUX1 OFF
2E Enable Direct Connect OFF
Aux 1 Zones none 5E Radio Arm unseal warning OFF
3E Enable Remote Arming OFF
Aux 2 Zones none 6E 24hr Zone Fire Siren OFF
4E Enable Remote Disarming OFF
1E Entry Beeps ON 7E RK4 AUX button to AUX1 OFF
5E Enable Remote AUX control OFF
2E Ksw Monitor/Disarm OFF 8E Quiet chirps on Arm/Disarm OFF
6E Enable Remote Status report OFF
3E Ksw Arm/Disarm OFF 1E ARM1 Pulse Output OFF
7E Enable Remote Event Report OFF
4E Tamper siren lockout ON 2E ARM2 Pulse Output OFF
8E Enable Callback Mode OFF
5E Duress to Reset OP OFF 3E Quiet Monitor Siren OFF
Required rings to answer
"No Memory Warning" zones
1
none
54
54
55
6E Auto Exclude Zones ON 4E 6 Beeps on Arming OFF
Clear Radio Devices
7E Auto KP display off OFF 5E
6E
7E
8E
Radio Key Monitor Arm
Disable Mains fail alarm
RK4 AUX button toggles AUX2
RK4 AUX button pulses AUX2
OFF
OFF
OFF
OFF
Clear Memory
8E Delay Arm1,2 outputs OFF
Factory Defaults
1E Tamper to Reset OP ON
Telephone No.1 Primary none
Clear User codes
2E Tamper to Strobe OP ON
Telephone No.2 Secondary none
Set Installer code 000000 14
57
60, 61
3E Tamper to Sonalert ON
Account No. 1 0000
4E Tamper to Siren ON
Account No. 2 0000
5E KP Panic to Reset OP ON
Report Zone Alarms All zones
1E Enable Output Expander OFF
6E KP Panic to Strobe Op ON
Report Misc. Alarms
2E Alternate Expander Format OFF
7E KP Panic to Sonalert ON
Report Zone Restorals All zones
3E Day Zone Follower OFF
8E KP Panic to Siren ON
Report Misc. Restorals
4E Output Exclude OFF
1E S/cut Memory display ON 27, 28
26
24, 25
23
23
23
22
22
22
19
19
19
21
21
21
21
20
20
18
18
18
17
17
17
16
16
15
15
15
15
14
14
56
56
41
Report Multiple Zone alarms
none 42
42
41
41
43
Output Expander zone Follower
none
2E S/cut Zone Exclude ON
Account No.2 Zones none
Output Expander zone Latch none
3E S/cut Monitor Mode ON
Tel No. 3 for Test Calls none
4E S/cut Keypad Panic OFF
Tel No.4 Callback none
5E S/cut Area 1 Arm ON
1E Restoral immediately OFF
6E S/cut Area 2 Arm OFF
2E Restoral after Siren Time OFF
7E Auto Exclude 2s Warn ON
3E Restoral on Disarm & seal OFF
8E Exit Time x 10 OFF
4E Restore on Disarm always ON
Radio Device Codes 1-16
none
P70E
P71E
P12E-P25E
P10E
P69E
P65E
P67
P82E
P60E
P27E
P28E
P29E
P30E
P31E-38E
P39E
P61E
P62E
P63E
P64E
P66E
P68E
P00E
P09E
P11E
P26E
P40E
P41E
P42E
P43E
P44E
P45E
P46E
P47E
P48E
P49E
P50E
P51E
P52E
P53E
P54E
P55E
P56E
P57E
P58E
P59E
P72E
P73E
P74E
P75E
P76E
P77E
P78E
P79E
P80E
P81E
These options are available in
.USER PROGRAM MODE
ALL options are available in
INSTALLER PROGRAM MODE.
PROGRAMMING OPTIONS SUMMARY
Technical Manuals Online! - http://www.tech-man.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ness D-16 and is the answer not in the manual?

Ness D-16 Specifications

General IconGeneral
BrandNess
ModelD-16
CategoryControl Panel
LanguageEnglish

Related product manuals