Ness D-16 User Manual

4343
4343
43
PROGRAMMING
NESS D16 (V4.6) CONTROL PANEL - INSTALLER MANUAL
ON = Factory default setting.
OPTION No DESCRIPTION
P75E Report Misc. Alarms ON ON ON ON ON ON ON ON
ONONONONONONONONONONONONONONONON
P77E Report Misc. Restorals
1E Duress 2E Medical 3E K/P & K/S Panic
4E Fire
5E Panel Tamper
6E External Tamper
7E Keypad Tamper
8E Exit Install mode
9E Radio Tamper
10E Radio Panic
11E Radio Battery 12E Supervision Fail
13E Panel Battery
14E Mains Fail
15E
16E
REPORT MISCELLANEOUS ALARMS
This option selects which Miscellaneous alarms will trigger the dialler to send
Alarm reports to the Central Station.
PROGRAMMING SEQUENCE:
P75E 1E-16E toggles the option ON and OFF
P75E 1E-16E OFF: Alarm reporting disabled for that miscellaneous alarm
P75E 1E-16E ON: Alarm reporting enabled for that miscellaneous alarm
P75E 1E-16E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
see table
NOTES:
• 0E will turn all selections OFF
MEMORY E will turn all selections ON
REPORT MISCELLANEOUS RESTORALS
This option selects which Miscellaneous Alarms will send Restoral reports to
the Central Station. The selections will report Miscellaneous Alarms restored
from the alarmed to the non-alarmed state.
Miscellaneous Alarms which have been selected to send a Restoral report will
always send the Restoral report when a valid code is entered to reset an alarm
or at Opening.
PROGRAMMING SEQUENCE:
P77E 1E-16E toggles the option ON and OFF
P77E 1E-16E OFF: Restoral reporting disabled for that miscellaneous alarm
P77E 1E-16E ON: Restoral reporting enabled for that miscellaneous alarm
P77E 1E-16E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
see table
NOTES:
• Mains Fail and Battery Fail Restorals are
sent when proper power has been
restored
• 0E will turn all selections OFF
MEMORY E will turn all selections ON
1E 2E 3E 4E 5E 6E 7E 8E
ON = Factory default setting.
Restoral immediately
Restoral after siren time
Restoral on Disarm & seal Restoral on Disarm always
.
.
.
.
OPTION No DESCRIPTION
P82E Zone Restoral reporting options
ON
RESTORAL REPORTING OPTIONS
This option selects when the dialler sends zone Restoral reports. Only one of
the following options may be selected.
Restoral reporting options also apply to 24hr zones.
PROGRAMMING SEQUENCE:
P82E 1E-4E toggles the option ON and OFF
P82E 1E: Send Restoral immediately
P82E 2E: Send Restoral after siren time
P82E 3E: Send Restoral on Disarm & seal
P82E 4E: Send Restoral on Disarm always
P82E 1E-4E
PROGRAM MODE LEVEL:
Installer, Remote by PC
FACTORY DEFAULT:
4E, ON: Always send Restoral on Disarm
NOTES:
• RELATED OPTIONS:
P76E Report zone restorals
Technical Manuals Online! - http://www.tech-man.com

Ness D-16 Specifications

General

Brand	Ness
Model	D-16
Category	Control Panel
Language	English