DOORBELL
If a Ness Radio Doorbell has been installed,
simply press the button once.
The doorbell tune is heard through the R16
onboard siren. The doorbell volume and the
tune can be set by the user.
Radio Doorbell
transmitter.
Press
If enabled by your installer, to sound the
Doorbell, press and hold the Radio Key
PANIC button for at least 4 seconds.
IMPORTANT NOTE: The R16 can be programmed
to allow Radio Key Panic to act as the DOORBELL.
This means Radio Key Panic will no longer
be available.
Hold
See pages 24 & 25 for doorbell volume and doorbell tune programming.
If a Ness Radio Doorbell has been installed, simply press the button once.
The R16 can also be programmed to operate the doorbell from the Panic button of Ness radio
keys. Note that in this case, the R16 cannot receive Panic alarms from radio keys.
To Next Page
Loading...
Need help?
General
