PROGRAMMING
Various system options can be programmed
by the user. These options can only be
accessed from Program Mode.
User Codes
or Radio Keys can be added
or deleted. Up to 15 keypad user codes or
14 Radio Keys or a mixture of both can be
programmed.
Entry and Exit timers can be changed if
necessary, (between 1 and 99 seconds).
The Doorbell Tune and Volume can be
programmed.
For all other programming changes, ask
your installer.
The panel will automatically exit Program
Mode if no buttons are pressed for
4 minutes.
The factory default
Master Code is:
123
To Next Page
Loading...
