Ness R8 - Doorbell Tune

NESS R8 CONTROL PANEL - USER MANUAL
25
See page 16 for Doorbell Operation.
TO PROGRAM DOORBELL TUNE
P6E is the programming option number
for Doorbell Tune.
See step 1 of Doorbell Volume Programming,
or if already in program mode, continue to step 2.
The current doorbell tune will be played and
the display will show the tune number from
1 to 9. The factory default tune is number 3.
E.g, Press 1E through 9E to find the tune you prefer.
Press...
Press... (1 - 9)
AVAILABLE TUNES
1 Westminster
2 Westminster (4 notes only)
3 Ding Dong
4 Ding Dong, (repetitive)
5 Star Spangled Banner
6 Fur Elise
7 Home Sweet Home
8 Green Sleeves
9 Chime
ACTION NOTE
Go to step 2 of any other programming option
or press... to exit program
mode.
The icon will turn off when you.
exit program mode.
PROGRAMMING - DOORBELL