| AlphaDisc CLD user guide V2.0
61
5.3 ALPHADISC™ CLD CONTROLLER PARAMETERS SETTING
AlphaDisc™ CLD Controller parameters can be set via AlphaDisc™ CLD Desktop application, AlphaDisc™ CLD Mobile
application, and AlphaDisc™ BLE Mobile application. See the list of settings and their description in Appendix A.
AlphaDisc™ CLD Controller Settings”.
Access to the Technician Settings requires a 4-digit code: 1234.
The Technician Settings contain the system’s basic and fundamental settings.
To set the controller parameters using AlphaDisc™ CLD Desktop application:
1. Open AlphaDisc™ CLD Desktop application. Sign in with your email and password if needed.
2. Go to Sites tab in left menu and select the site where you want to set parameters.
3. Go to Settings tab. Here you can set parameters.
4. Enter 4-digit code (1234) and click SUBMIT to enter the Technician Settings.
5. Make sure to click Save after changing any of the settings.
NOTICE
Do not change any of these settings if you are not totally familiar with the specific filtration system, filters, and
controller. Incorrect settings may cause the system to become nonoperational!
NOTICE
Do not change any of these settings if you are not fully familiar with the specific filtration system, filter type, and
controller. Incorrect settings may lead to nonoperational system.
To Next Page
Loading...
Need help?
General
