Netafim AlphaDisc CLD User Manual

| AlphaDisc CLD user guide V2.0
67
5.5 ALPHADISC™ CLD CONTROLLER COUNTERS RESET
AlphaDisc™ CLD Controller has five flushing cycles counters:
1. Total flushing cycles –overall number of cycles performed by the controller during operation. This number cannot
be reset.
2. DP cycles – number of flushing cycles started due to a DP signal.
3. Flushing Interval cycles – number of flush cycles started due to the time intervals program.
4. Manual cycles – number of flush cycles initiated manually by the user.
5. Preset cycles – number of flush cycles started due to the preset start times.
Counters 2-5 can be reset via AlphaDisc™ CLD Desktop application, AlphaDisc™ CLD Mobile application, and
AlphaDisc™ BLE Mobile application.
To reset the counters using AlphaDisc™ CLD Desktop application:
1. Sign in to AlphaDisc™ CLD Desktop application.
2. Go to Sites tab in left menu and select the required site.
3. Go to Overview tab and click Reset in the Flushing Cycles field. The counters will reset.

Netafim AlphaDisc CLD Specifications

General

Brand	Netafim
Model	AlphaDisc CLD
Category	Controller
Language	English