Netafim AlphaDisc CLD User Manual

| AlphaDisc CLD user guide V2.0
63
To set the controller parameters using AlphaDisc™ BLE Mobile application:
1. Open AlphaDisc™ BLE Mobile Application. Verify that the controller is within Bluetooth® range (Bluetooth® icon is
blue).
2. Select the required site where you want to set the parameters.
3. Click to open Settings menu.
4. Click Technician Settings and enter 4-digit code (1234) to access Technician Settings.
5. Make sure to click Save after changing any of the settings.
NOTICE
Do not change any of these settings if you are not totally familiar with the specific filtration system, filters, and
controller. Incorrect settings may cause the system to become nonoperational!

Netafim AlphaDisc CLD Specifications

General

Brand	Netafim
Model	AlphaDisc CLD
Category	Controller
Language	English