Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere MAX User Manual
134
|
Controller Operation
GrowSphere
Operating System
6.7.6 Managing Irrigation Program Queue
The Queue tab displays the irrigation programs waiting to be executed, sorted by Normal
priority and High priority. Perform the following steps to mange the queued programs:
3. Select the relevant
program
Tap the program name to
select it.
Remove all button
Tap to remove all programs
from the queue.
2. Tap the Queue tab
4a. Tap Remove to remove
the selected program from the
list.
1. Tap the SCADA button
4b. Tap Move to High
Priority to move a selected
program to the High Priority
list.
NOTES
z
The ID column represents
the order in which the
programs are to be
executed.
z
The Waiting in Q column
represents the amount
of time the program has
been waiting in the queue.
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English