Netafim Orbia GrowSphere MAX User Manual

Rev 01
|
GrowSphere
™
MAX User Manual
68
|
Controller Configuration
GrowSphere
Operating System
5.4.4 Configuring Dosing Station
The system displays a row for each of the valves defined in the Configuration tab. Perform
the following steps to configure the dosing station:
3. Tap the Configuration
tab
4. Tap the Dosing Station
tab
1. Tap the Configuration
button
z
Dosing Station: Select the extensive or
intensive option.
z
Extensive: This option is chosen when
the dosing station/dosing channels are far
away from the controller. In this case, the
dosing channels are activated by remote
terminal units.
z
Intensive: This option is chosen when
it is necessary to inject fertilizers and
chemicals with more precise control.
z
Dosing Channels: Select the desired
channels of the dosing station.
z
Booster O.L: Select when the booster
overload protections are connected to the
controller.
z
EC Sensor: Select the amount of EC sensors
connected.to the dosing station.
z
pH Sensor: Select the amount of pH sensors
connected to the dosing station.
5. Define the dosing station parameters:
2. Select Settings and type
your credentials
SAFETY
QUICK START
INTRODUCTION
INSTALL ATION
CONTROLLER
OPERATION
CONTROLLER
CONFIGURATION

Netafim Orbia GrowSphere MAX Specifications

General

Brand	Netafim
Model	Orbia GrowSphere MAX
Category	Controller
Language	English